The IITC mouse and rat tail blood pressure testing systems are unique in the fact that the data supplied from them have been validated to both: Telemetry and within 5mmHg cannulation (direct BP).

These systems are supplied with a Lifetime Warranty which no other manufacturer offers and the most critical factor using the lowest ambient temperature of any method in the world. We at IITC pride ourselves in the fact that for 33 years we have been selling blood pressure systems globally to many well known and respected universities, pharmaceutical and biotech companies.

Some of the systems that are currently running globally are original designs that date back as far as 1975. We truly are the “World Leader in Noninvasive Blood Pressure Testing Equipment” the “Gold Standard” in the world and proud of the fact that our equipment supplies accurate and reproducible blood pressure data for rats, mice and every other laboratory animal.

The IITC Life Science tail cuff blood pressure systems are supplied with an artifact filter which eliminates breathing and movement artifacts; Why the filter? Our sensors are so superior in design and sensitive that they will pick up small readings.

Our photoelectric sensors are superior in design and pulse pickup allowing researchers clean and easily identifiable signals, due to the extreme sensitivity of our sensors (tail cuffs). IITC’s systems are the only systems that have a single component designed cuff on the market today. The IITC single component design allows the operator ease of setup and use. Place the animals tail through the sensor cuff and start taking blood pressure measurements, animal movement (turning. moving does not affect your recordings). Others use a bulky, two piece piezoelectric design that picks up the signal, it is known to not have as high sensitivity as photoelectric sensor despite their claims.

Measuring blood pressure non-invasively on the tail via the IITC tail cuff method on mice and rats is user friendly as well as humane for the fact that we are the only manufacturers to have blood pressure testing systems available to the researcher that do not require high heat to obtain blood pressure recordings on laboratory animals all other systems require anywhere from 34 to 38 deg. C. Unlimited technical support and if desired an IITC representative will visit your location to set-up and train staff to the proper use and configuration of equipment.

System information: Amplifier with a built-in automatic inflation cuff pump a scanner which enables the user to switch from animal position 1 thru 12 and a warming chamber for assuring that the animals are kept at ambient temperature (other manufacturers claim that there is no need to warm the animal with their system but they fail to state that their systems are supplied with either heated restrainers or a heating unit that the animal is restrained in and that only their tail is being warmed not the animal.)

These as well as other statements by various other manufacturers of noninvasive blood pressure testing equipment lead a potential user to believe that these types of testing methods are far superior to the warming of animals in a chamber when in fact it is almost the same except for one vital piece of information - Their systems require not “warming” the animal but “heating” the animal up to as high as 38 deg.C at this and other high temperatures the potential for loss of animal as well as “thermostress” is a given.

System includes: Amplifier with a built-in cuff pump for automatic inflation of the tail cuffs. Manual scanner allows switching from test position one thru 12 while scanning both tail signal and inflation only of the cuff or animal under test. This avoids any edema on the tail (All other manufacturers multiple animal systems inflate all cuffs at once which will recreate edema.

Warming chamber to assure that uniform warming of the animals occurs during test period. The 6 rodent restrainers and 6 tail cuffs (sensors) for specified weight range. SP-1 Accessory package is supplied with spare cuff liners, o-rings, Tygon tubing for port connections, nylon screws for attachment of sensors to restrainers a bulb and pressure gauge.

Data collection software or chart recorder needs to be added to the above system. Either can be purchased directly from IITC or we are compatible with existing software and chart recorders on the market. IITC’s systems are not limited to our data collection software only unlike others on the market.

Part #
6M229 Six channel noninvasive mouse blood pressure system

6R229 Six channel noninvasive rat blood pressure system

Options: Model 31 IITC Blood pressure software

Lifetime Warranty on Amplifier and cuffs (sensors)
One Year Warranty on Automatic cuff pump, manual scanner, warming chamber and restrainers
CE Certified
Power: 120/240 VAC