Head-stages, electrodes and accessories

Part No. 10-02010
SUPER-Z Head-Stage
Very high-impedance head-stage for use with all CWE amplifiers, including BMA-200, BMA-400, and BMA-931. Features switchable 1X/10X gain, AC or DC coupling, DC microvolt calibrator, and adjustable DC offset. Inputs are 0.080″ (2mm) pin jacks. Flip-up feet (shown extended).
Dimensions: 3.5″W x 4″D x 1″H (8.9 x 10.1 x 2.5cm)

Category: Amplifiers Tag: Amplifiers

Features

Description

Part No. 10-02020
ISO-Z Head-Stage
Electrically isolated head-stage for use with all CWE amplifiers, including BMA-200, BMA-400, and BMA-931. Features 10X gain, DC coupling, 500uV AC calibrator. Inputs are 1.5mm Touch-Proof sockets. Flip-up feet (shown extended)
Dimensions: 3.5″W x 4″D x 1″H (8.9 x 10.1 x 2.5cm)

Part No. 10-02063
E-422 Snap-type electrode leads, set of 3
Color-coded standard snap leads for disposable ECG-type electrodes. 39″ (1m) long, terminated with 1.5mm Touch-Proof plug. Does not include electrodes.

Part No. 10-02065
Alligator clip electrode leads, set of 3
Color-coded, solid copper miniature alligator clip leads. 39″ (1m) long, terminated with 1.5mm Touch-Proof plug. Application: animal ECG recording.

Part No. 10-02064
NEE-3 Needle electrode leads, set of 3
Small diameter stainless steel electrode leads. 39″ (1m) long, terminated with 1.5mm Touch-Proof plug. Application: animal ECG or EMG recording.

Part No. 10-02060
E-220X-LS reusable Ag-AgCl electrode leads, each
1cm overall diameter biopotential skin electrode, 39″ (1m) long, terminated with 1.5mm Touch-Proof plug. Application: ECG or surface EMG recording. Requires Adhesive Disks and electrode gel (see below)

Part No. 10-02062
E-401 Adhesive Disks for E-220X-LS electrodes, pack of 100
Self-adhesive washers for attaching reusable electrodes.

Part No. 10-02051
PIN-DIN Adapter wire, set of 3
Use for adapting pin-plug terminated leads to 1.5mm Touch-Proof sockets. 5″ (12cm) long.

Part No. 10-02040
BMA-931/CON 7-pin amplifier input plug, each
Unwired input connector for BMA-200, BMA-400, BMA-931, CT-1000. Use this plug for making custom input cables.

Part No. 10-04020
PM-CON 6-pin transducer amplifier input plug, each
Unwired input connector for BP-100, TA-100, BP-832. Use this plug for making custom transducer input cables.