KDS Legato 100 Infuse Only Syringe Pump

Infuse only single syringe pump. Accommodates syringes from 0.5ul to 60ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.

Category: KD Scientific

Features

Holds one syringe from 0.5ul to 60ml
Stall detection
High resolution color touch screen
Unparalleled ease of use
Password protected touch display
Run LED light on front panel
Full metal chassis
Built in syringe table
Up to 30 lbs/13kg linear force
Advanced microstepping techniques
Built in RS485 interface
USB port
I/O & TTL interface
Continuous mode of operation
Spill dam

Description

Specs

Specifications
Accuracy:	± 0.5%
Reproducibility	± 0.05%
Syringes (Min/Max)	0.5 ul to 60ml
Flow Rate:	Minimum (0.5 ul syringe): 1.28 pl/min Maximum (10ml syringe): 25.99 ml/min Maximum (60ml syringe): 88.28 ml/min
Display	4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory	Stores all Settings
Connectors:	RS485 – IEEE-1394 6 pos USB – Type B I/O & TTL – 15 pin D-Sub Connector
Linear Force (Max)	13.6 kg (30 lbs) @ 100% Force Selection
Drive Motor	0.9 Stepper Motor
Motor Drive Control	Microprocessor with 1/16 microstepping
Number of Microsteps per one rev.of Lead Screw	15,360
Step Revolution	0.069 um/step
Step Rate – Minimum	27.5 sec/ustep
Step Rate – Maximum	26 usec/ustep
Pusher Travel Rate – Minimum	0.15 um/min
Pusher Travel Rate – Maximum	159 mm/min
Power	100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions	22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)
Weight	2.66 kg (5.9 lbs)
Operating Temperature	4 degree C to 40 degree C (40 degree F to 104 degree F)
Storage Temperature	-10 degree C to 70 degree C (14 degree F to 158 degree F)
Humidity	20% to 80% RH non condensing
Mode of Operation	Continuous
Classification	Class 1
Pollution Degree	1
Installation Category	11
Regulatory Certification	CE, UL, CSA, CB Scheme, EU RoHS