Maximum syringe size:
Although a maximum of a 60 cc syringe is specified, the pump can hold up to a 140 cc syringe but can only open up to about 120 cc lengthwise.

High pressure notes:
The NE-500 produces about 15 lbs. of linear force at top speed and about 35 lbs at slow speeds. 10 ml/hr is an example of slow speed. The pressure that can be generated is relative to the syringe size. On a 60 ml syringe, this would roughtly produce about 30 psi

The high pressure version, NE-510, will approximately double the pumping force at the same speeds.

Computer controllable: networkable up to 100 pumps. Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attached Foot Switch, button, or I/O controller
Add the OEM Starter Kit to run as a fully functional, stand-alone pump

Description:
Does not have a built-in user interface
Chassis mountable: 9 1/2”L x 4 1/4”W x 4 1/8”H (23.5 x 10.8 x 10.5 cm)
Operates from a 12V DC 700mA (2.1 mm center-positive barrel) power source
Holds 1 syringe up to 60 cc
Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
Includes all the advanced functions and programming features of the NE-1000 family
Download free pump terminal emulator
Custom modifications to the mechanics and firmware available

Features:
Built for Automation
Operates from a computer
Infusion and withdrawal
Set a single pumping rate and/or dispensing volume
Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
Network, control, and monitor up to 100 pumps with one computer
Motor stall detection available in NE-501 model
Dispensing accuracy of ± 1%
Unlimited lifetime technical support

Part ID: PUMP-NE500
Part ID: PUMP-NE500-STARTER-U

Two year warranty
120/240V
CE

Syringe Size (cc)	Maximum Rate (mL/hr)	Minimum Rate (µL/hr)
0.5 µL	25.49	0.001
1	53.09	0.73
3	192.5	2.646
5	406.1	5.581
10	600	8.244
20	975.8	13.41
30	1282	17.63
60	2120	29.13